Tools

We have an entire line of tools to aid in the safe removal and installation of bearings into all parts of the bicycle. Our tools are 100% US made by Sonny’s Bicycle Tools here in California.

Click here for a full catalog of our tools

Our Tools

Hub Press (BRT-005)

Tool for pressing bearings into hubs, pivots, and some bottom brackets.

Pilot Bushing Set (BBT-004)

Tool for pressing bearings, to be used in conjunction with the BRT-005.

Front Hub/Needle Bearing Press (BRT-045)

Tool for pressing smaller size bearings into hubs, and suspension pivots.

Needle Bearing Guides (NBT-030)

Needle Bearing Guides to be used in conjunction with the BRT-045.

Pro Bearing Removal Tool (BBT-200)

Professional-Grade Tool for pulling bearings pressed into hubs and pivots.

Blind Hole Set (BBT-100)

Tool for pulling bearings pressed into hubs and pivots.

DT Swiss (BBT-013)

Tool for pulling bearings pressed into hubs and pivots.

TorqTite & T47 Pro Tools (BBT-015 & BBT-025)

Tools for installing your TorqTite or T47 Bottom Bracket.

X-Drive Tool (BRT-001)

Tool for removing and installing bearings into any standard outboard cups.

X-Drive Toolset (BBT-001)

Tool for removing and installing outboard bottom bracket cups.

Shimano Crank Tool (BBT-001/B)

Tool for tightening the preload fixing bolt on Shimano cranks. Lists the different bearing

torque specs and comes with a 3/8" drive adaptor for torque wrenches.

BB86/92 Toolset (BRT-003)

Tool for removing and installing BB86/92 bottom bracket cups, and the bearings inside them.

BB30 Tool (BRT-002)

Tool for removing and installing 6806 bearings into BB30 bottom bracket shells.

BB90 Tool (BBT-006)

Tool for pressing bearings into BB90 bottom bracket shells.

Pedal Dummy Tool (CT-010)

Tool for making adjustments on the bike when pedals are not present.

Campy Pilots (CT-007)

Tool for pressing bearings onto Campagnolo Ultra-Torque cranks.

Campy Tools (CT-006)

Tool for removing bearings from Campagnolo crank spider.

Cap Pin Tool (CT-002)

Tool for removing cap pin on FSA, Zipp, and Cannondale cranks.

Lefty Hub Pin Tool (LHT-001)


Tool for removing and replacing cap for Cannondale Lefty hubs.

Hollowgram Crank Tool (CT-008)

Tool for removing Cannondale Hollowgram cranks.

Cannondale Tool (CT-001)


Tool for changing chain rings on Cannondale cranks.

Rotor Compact Spider Lockring Tool (CT-003/2)

Tool for removing and installing the lockring on Rotor 30mm cranksets.

Rotor 24mm Spider Lockring Tool (CT-004)

Tool for removing and installing the lockring on Rotor 24mm cranksets.